| BRAND | Wilo |
| Product | TOP-Z 25/6 |
| Description | Standard wet runner pump |
| Internal code | IMP4925911 |
| Custom code | 2045522 |
| Technical specification | DM PN6/10 Article number 2045522 Features and function - Manual power adjustment with 3 speed levels - Pumps with 1~ motor: - P2 up to 90W: Internal protection against impermissible levels Winding temperatures - P2 = 180W: full motor protection through winding protection contacts in conjunction with trigger device - Pumps with 3~ motor: - P2 up to 90W: Internal protection against impermissible levels Winding temperatures - P2 ≥ 180W: full motor protection with integrated Trigger electronics - Fault light - Contact for central fault message - Rotation control lamp - 3~230V power supply with optional switch plug - Gunmetal or gray cast iron (stainless steel) pump housing depending on the type) - PN 6/PN 10 combination flange (for DN 40 to DN 65) - thermal insulation shells - Additional functions thanks to retrofittable Protect module C: - SSM fault message as a potential-free opener - SBM operating message as a potential-free closer - “Priority Off” tax input from external potential-free Contact (opener) - Blocking detection - Full motor protection with trigger - Failure acknowledgement - Dual pump management (two single pumps in parallel installed): main/reserve mode (automatic fault switching/time-dependent pump replacement) Operational data Pumped medium: water 100% Media temperature: 20.00 °C Requested flow rate: Requested funding amount: Max. media temperature: 65 °C Min. media temperature: 0 °C Min. ambient temperature: 0 °C Max. ambient temperature: 40 °C Temperature range when used in drinking water circulation systems at ambient temperatures of +40°C in Short-term operation 4 h: Temperature range at max. ambient temperature +40 °C: - 20... +110 Maximum operating pressure: 10 bar Maximum allowable total water hardness: 3.57 mmol/l (20 °dH) (3.21 mmol/l (18 °dH) for 20/4 + 25/6) motor data Interference emission: EN 61000-6-3 Noise resistance: EN 61000-6-2 Power connection: 3~400V/50 Hz power consumption: 210 W Max. speed: 2,450 rpm Rated current: 0.45 A Motor protection class: IPX4D Cable connector: 1 x PG13.5 materials Pump housing: 1.4301 Impeller: PPE-GF30 Shaft: oxide ceramic Storage: charcoal, impregnated with synthetic resin installation dimensions Suction-side pipe connection: G 1½, PN 10 Pressure side pipe connection: G 1½, PN 10 Overall length: 180 mm ordering information Make: Wilo Product name: TOP-Z 25/6 DM PN6/10 |
Please Contact Us to Order to offer competitive prices and delivery time for Wilo - TOP-Z 25/6 Standard wet runner pump number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Lithuania Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
(HochdruckkreiselpumpeNormalsaugende, high-efficiency multistage High-pressure centrifugal pump in a vertical version with Inline connections. Impellers, guide wheels, stage housing are made of stainless steel. IE2 IEC standard motors, 3 ~, 2-pole. Motor protection on request. The terminal box is attached in line with the suction nozzle, Position can be changed depending on the installation on request become. Interim storage in hydraulics ensures Product reliability. PN16 versions with oval flange and PN25 with DIN round flanges. special integrated Transport bracket for easy pump installation. helix Pumps at thanks to the modular concept existing installations to be adapted on request. The flexible lantern design, which on payment Orientations is available, allowing direct Access to the mechanical seal. WRAS / KTW / ACS - Release for all wetted components (EPDM version).)
HELIX V 220-1/25/E/K/400-50 ART. NR.4161728
Pump housing: 1.4301 Wheels: 1.4307 Stage housing: 1.4307 Shaft: 1.4301 O'Ring: EPDM : Medium: water Temperature (-20..120 ° C): 20 ° C Flow rate: 2.00 m³ / h Head: 120.00 m Operating pressure: 25 bar (Max.) Supply pressure: 10bar Minimum Efficiency Index (MEI):> = 0.70 Engine: -Nennleistung P2: 2.2 kW -Nenndrehzahl 2900 1 / min -Stromart: 3 ~ 400V / 50Hz -Nennstrom: 4.5 A -Protection: IP 55 Suction / discharge connection: DN25 / DN25 Make: Wilo Type: Helix V 220-1 / 25 / E / K / 400-50 Item number: 4161728
P/N: 4162724, Type: V 613-1/16/E/400-50
High pressure centrifugal pump
Glanded standard single pump Item number: 2088344
Glanded standard single pump Item number: 2088368
IL-E 50/220-15/2-R1-L1 ART. № 2124685/1202
differential pressure transmitters
Glanded standard single pump Item number: 2089575
Glanded standard single pump Item number: 2089584
Glanded standard single pump Item number: 2129200
IPL 65/140-4/2obsolete,replacementIPL 65/130- 4/2 PN 10
pump network G=73.0.0m3/h, H=13.0m, N=4.0 kW, PN=10 bar, 3 ̴
Glanded standard single pump Item number: 2089607
PANEL, ELECTRIC CAPACITY: 217L/MIN X 2 ON PRESSURE: 2kgf/CM2 OUTPUT: 3KW 3P 400V S/NO. 10100172
hydrophore PRESSURE TANK
High pressure centrifugal pump Item number: 4148926
MHI 406N 3~400/1.4404/Viton PN10
(High pressure centrifugal pump)
PUMP, BOOSTER COMPLETE WITH ELECTRIC MOTOR PUMP POWER: 1.1KW FLOW CAPACITY: 84L / MIN3 MAX PRESSURE: 10 BARS S/N: 01200025 VERTICAL MULTI STAGE PUMP MFR: WILO PUMPS MOTOR: MODEL: PMI - 1104Q2 TYPE: TEFC POWER: 1.1KW (1.5HP) 2P VOLTAGE: 400 CURRENT: 2.5A RPM: 2870 S/NO. 01200002
High pressure centrifugal pump
Pump
PUMP POWER: 3.0KW MAX PRESSURE: 16BAR FLOW CAPACITY: 217 L/MIN SERIAL NO. 01200006 VERTICAL MULTI STAGE PUMP MOTOR MODEL: PMI - 3004Q1 TYPE: TEFC POWER: 3.0KW VOLTAGE: 400 CURRENT: 6.2A RPM: 2886 FREQUENCY: 50 HZ
High pressure centrifugal pump Item number: 4077526
pump
PUMP SANTRIFUJ AS304
S 40/60 OIL PN 6. NR: 1274291/9610 - obsolete - REPLACED BY IPL 40/110-0,12/4 PN 16 -S2-440V-60Hz
complete pump440 volts, 55 IP, 50/60
for MTU 396
