BRAND | Haupa |
Product | 110592 |
Internal code | IMP4465131 |
Custom code | 82041200 |
Technical specification | Haupa Adjustable wrench (No: 110592), maximum length 200 mm, or equivalent product with the following features: - Length: Minimum 180 mm and maximum 220 mm - The minimum width of its mouth is at least 8 mm and at most 10 mm, its maximum width is at least 23 mm and at most 25 mm, - key hardness must be at least 40 HRC - for key head; 32 HRC - for handle; - parameters of the roughness of the surfaces of Ra keys - no more than: 1.6 micron - support surfaces of the jaws and the outer contour; 6.3 micron - working surfaces of the throats; 12.5 micron - other surfaces. - torque of not less than 180 Nm; - The working surfaces of the key jaws must be parallel to each other; - enlargement towards the floor of the mouth not exceeding 2°, deviation from parallelism is allowed; - the angle of inclination of the head is at least 20° and not more than 24°; - the handle must be covered with a layer of polyvinyl chloride or rubber; - Weight min 300 and max 400 g. |
Please Contact Us to Order to offer competitive prices and delivery time for Haupa - 110592 number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Lithuania Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Dispenser box with insulated end sleeves
P/N: 116246,Type: RIEGEL CES-AC/F-AP-C01-AH-SB-116246
VERRIEGELUNGSEINHEIT
Slip-on sleeve
Cordless hydraulic cable cutter
RELAY MODULE
testing tool
spade
Al screw cable lug
Al screw cable lug
hacksaw frame
Tip cable
cable gland
cable gland
Tape measure
Tape measure
Locksmith Hammer
Double sided wrench set
Ring/jaw wrench set
Tool Bag
Tool Bag
Screwdriver set for electronic devices.
Screwdriver set
Allen key set for Haupa screws
Socket set and accessories